Now it's time to begin pinning the triangle pieces to the star. Keep in mind there are no "must follow rules" they are all left up to your individuality and how you would like to arrange the layers. Also, things won't match up perfectly. That's OK, slap on another layer and cover up the imperfection :-). Most of all, make it your own.
Place two of the unfolded squares evenly spaced apart on the foam. Pin each corner and have the corners meet from each side evenly spaced apart.
Layer 1 Step 1 - Place your first triangle directly on the flat 2.5" square just placed. Match the wide edge of the triangle with the corners of the squares. Pin the corners first and then the point. Remember, place the pin in the point in between the two folds a little below the edge. Then pull the folded flaps up and over to hide the point pin.
Layer 1 Step 2 - Complete the second triangle directly across from the first one placed, same method.
Layer 1 Step 3 - Place the 3rd triangle in the empty space besides the two just placed, match points.Layer 1 Step 4 - Place the last triangle to finish the square. All points should match up.
Next layer, decide how large you want your center star. You should be able to fit 3 or 4 layers without using half the foam ball's space.
Layer 2 Step 1 - When you decide where you would like to start layer two, place in the point pin first and then pin down the outer corners of the triangle.
Layer 2 Step 2 - Place the second piece completely opposite of Layer 2 Step 1. Pin center, hide pin, pin corners of triangle.
Layer 2 Step 3 - Place the third piece 90 degrees from pieces 1 and 2 from layer 2. Pin center, hide pin, pin corners of triangle.
Layer 2 Step 4 - Place the 4th piece directly opposite of piece 3. Pin center, hide pin, pin corners of triangle.
Layer 2 Step 5 - Now add a 5th triangle to the areas not covered by the 4 pieces of layer 2. It's almost like another layer of the same color. You are now starting to form your star. Pin center, hide pin, pin corners of triangle.
Layer 2 Step 6 - Place the 6th piece completely opposite of Layer 2 Step 5. Pin center, hide pin, pin corners of triangle.
Layer 2 Step 7 - Place the 7th piece 90 degrees from pieces 5 and 6 from layer 2. Pin center, hide pin, pin corners of triangle.
Layer 2 Step 8 - Place the 8th piece directly opposite of piece 7. Pin center, hide pin, pin corners of triangle. You should see your first star.
Layer 3 - next color
Layer 3 Step 1 - When you decide where you would like to start layer three, place in the point pin first and then pin down the outer corners of the triangle.Layer 3 Step 2 - Place the second piece completely opposite of Layer 3 Step 1. Pin center, hide pin, pin corners of triangle.
Layer 3 Step 3 - Place the third piece 90 degrees from pieces 1 and 2 from layer 3. Pin center, hide pin, pin corners of triangle.
Layer 3 Step 4 - Place the 4th piece directly opposite of piece 3. Pin center, hide pin, pin corners of triangle.
Layer 3 Step 5 - Now add a 5th triangle to the areas not covered by the 4 pieces of layer 3. It's almost like another layer of the same color. You are now starting to form your second star. Pin center, hide pin, pin corners of triangle.
Layer 3 Step 6 - Place the 6th piece completely opposite of Layer 3 Step 5. Pin center, hide pin, pin corners of triangle.
Layer 3 Step 7 - Place the 7th piece 90 degrees from pieces 5 and 6 from layer 3. Pin center, hide pin, pin corners of triangle.
Layer 3 Step 8 - Place the 8th piece directly opposite of piece 7. Pin center, hide pin, pin corners of triangle. You should see your second star.
If you have room for another layer without going over the half way point of the foam ball, switch colors and repeat steps from Layer 3.
Once you are done with all your layers, I sometimes go back and pin down all the exposed outer edges in prep for the ribbon or fabric wrap that will hide all the pins.
When finished, flip over the ornament and repeat all steps. I like to use opposite center color and then build out.
Thanks for stopping by
~*~Trish~*~
This is so fantastic.
ReplyDeleteI have been searching the internet for months and finally I found instructions for these beautiful ornaments.
Thank you so much.
If you post any more instructions let me know clarebless@prodigy.net